Commercial Heavy Bag Rail & Track Systems
Move heavy bags between planned training positions and a defined parking route, so the same floor can support boxing, combat fitness, open-mat work or conditioning at different times.
Commercial rail visualization. Complete 3D, side elevation, and top-view route layout engineered and verified against approved project drawings.
What is a commercial heavy bag rail system?
A commercial heavy bag rail system is a project-specific steel track that allows hanging bags to be moved between defined workout stations and a planned parking area. EVB can review ceiling-mounted, suspended, floor-supported and wall-mounted directions against the room plan, supporting structure, bag selection and required clearances.
4 Configuration Directions for Commercial Venues
These are configuration directions, not universal kits. Final supports, connections, route geometry and station loads are confirmed on the approved project drawing.
Overhead Ceiling or Suspended Track
Floor-Supported Rail System
Wall-Mounted Track
Integrated Training-Zone Layout
Commercial Rail System Specification Framework
| Engineering item | Documented EVB capability | Confirmed for the actual project |
|---|---|---|
| Structural steel | Q235 steel is documented in EVB technical material. | Section size, thickness, connections and any substitutions are confirmed on the project drawing and quotation. |
| Surface finish | Powder-coated steel finish is documented. | Color, finish system and project environment are confirmed before production. |
| Trolley function | The documented trolley provides lock and unlock functions for repositioning the bag. | Trolley selection, locking arrangement, suspension and filled bag data are confirmed per project. |
| Route planning | Modular track and multiple support directions are documented. | Straight sections, turns, end points and parking path are approved for the room plan. |
| Bag stations | Working positions can be planned along the route. | Station count, spacing, hanging height and clearances are project inputs—not universal published values. |
| Site structure | Ceiling, suspended, floor-supported and wall-mounted directions can be reviewed. | A qualified local party must verify the receiving structure, anchors and site conditions. |
| Supply and installation | Modular and flat-packed supply is documented. | Packing, installation scope, local work and responsibilities are stated in the written quotation. |
Project Drawings Before Production
EVB uses its DrawHub workflow to turn the buyer’s available venue information into a reviewable configuration direction. Drawing content and turnaround are confirmed with the project scope rather than promised as a universal deadline.
1. Send the available plan
2. Review the route
3. Approve the project basis
Built for Brands, Distributors and Equipment Suppliers
EVB manufactures and configures the rail equipment scope so brands, distributors and equipment suppliers can deliver their own downstream gym projects. Final private-label details, finish, documentation, packaging and supply boundaries are defined in the written quotation.
Private-label requirements
Finish and color
Project documentation
Direct Answers for Project Planning
ما هي البنية المطلوبة لنظام سكة تعليق أكياس الملاكمة الثقيلة المعلقة؟
لا توجد إجابة عامة. يجب تحديد حالة الخرسانة المستقبلة أو الفولاذ الإنشائي أو العوارض الخشبية أو أي عناصر دعم أخرى والتحقق منها بالنسبة للمسار المقترح. وفي حالة عدم ملاءمة الدعم العلوي، يمكن النظر في اتباع مسار مدعوم بالأرضية. وتظل الجهة المحلية المؤهلة مسؤولة عن التحقق من هيكل المبنى ومثبتاته.
ما هي الحمولة التي يمكن أن تتحملها كل عربة سكة حديدية؟
لا تنشر شركة EVB تصنيفًا واحدًا للحمولة لكل مشروع. يجب التأكد من العناصر التالية مجتمعةً في المخطط المعتمد للمشروع وعرض الأسعار المكتوب: العربة المستخدمة، ونظام التعليق، ووزن الكيس المملوء، والاستخدام الديناميكي، والمسافة بين الدعامات، والهيكل المستقبل.
هل يمكن للمسار أن يتبع المنعطفات أو شكل الغرفة المخصص؟
يتم تخطيط المسار استنادًا إلى المخطط الفعلي للغرفة، وليس من خلال اختيار نموذج تخطيطي موحد. ولا يتم تأكيد المنعطفات ونقاط النهاية ومواقع الدعامات ومسار الوقوف إلا بعد مراجعة الشكل الهندسي والهيكل.
كيف يتم تثبيت الأكياس في مكانها أثناء التدريب؟
توثق المواد الفنية الخاصة بـ EVB عربة مزودة بوظائف القفل والفتح. ويتم التأكيد على العربة المختارة، ونظام القفل، وأوضاع التشغيل، وتفاصيل نظام التعليق الخاصة بالمشروع قبل بدء الإنتاج.
هل تقدم EVB خدمات تخطيط التخطيطات الخاصة بالمشاريع؟
يمكن لشركة EVB مراجعة معلومات التخطيط الخاصة بالمشروع من خلال سير العمل الخاص بها في DrawHub. وترد تفاصيل حزمة الرسومات الدقيقة والمدخلات المطلوبة ومدة الإنجاز في عرض الأسعار المكتوب.
How is the system prepared for export shipping?
EVB technical material documents modular, flat-packed supply. Section lengths, crates or cartons, component marking, loading plan and installation documents are confirmed according to the approved configuration and shipment requirements.
Request a Project-Specific Rail Quote
Send the project details you have on hand—any open items can be reviewed and confirmed during quotation:
- Company or brand name and destination market
- Dimensioned room plan and available supporting information
- Ceiling, beam, wall or floor-support information
- Bag models, quantities, filled weights and hanging height
- Preferred working positions and parking area
- Finish, documentation requirements and target timeline
المواد الموثقة ومعايير السلامة
مواد ذات جودة تجارية، تم التحقق من ملاءمتها للمشاريع العالمية
Ceiling Track Punching Bag Rail System
Links multiple bags on a sliding track so operators can deploy or park stations and convert the room for team classes.
Engineering & Technical Specifications
| مادة الهيكل | Heavy-gauge Q235B structural carbon steel (seamless welding) |
|---|---|
| Steel Tubing Thickness | 3.5 mm – 4.0 mm industrial structural wall thickness |
| تشطيب السطح | Electrostatic double-stage powder coating (anti-corrosion, anti-scratch) |
| Load / Impact Capacity | Tested to withstand dynamic impact exceeding 8,000 N / 500 kg static load |
| Safety & Compliance | CE Certified, complies with EN ISO 20957 commercial fitness standards |
| Customization (OEM/ODM) | 0 MOQ custom dimensions, RAL powder colors, UV laser printed branding |
| Packaging Standard | Reinforced export-grade plywood crates with custom internal foam cradles |