Commercial Heavy Bag Rail & Track Systems
Move heavy bags between planned training positions and a defined parking route, so the same floor can support boxing, combat fitness, open-mat work or conditioning at different times.
Commercial rail visualization. Complete 3D, side elevation, and top-view route layout engineered and verified against approved project drawings.
What is a commercial heavy bag rail system?
A commercial heavy bag rail system is a project-specific steel track that allows hanging bags to be moved between defined workout stations and a planned parking area. EVB can review ceiling-mounted, suspended, floor-supported and wall-mounted directions against the room plan, supporting structure, bag selection and required clearances.
4 Configuration Directions for Commercial Venues
These are configuration directions, not universal kits. Final supports, connections, route geometry and station loads are confirmed on the approved project drawing.
Overhead Ceiling or Suspended Track
Floor-Supported Rail System
Wall-Mounted Track
Integrated Training-Zone Layout
Commercial Rail System Specification Framework
| Engineering item | Documented EVB capability | Confirmed for the actual project |
|---|---|---|
| Structural steel | Q235 steel is documented in EVB technical material. | Section size, thickness, connections and any substitutions are confirmed on the project drawing and quotation. |
| Surface finish | Powder-coated steel finish is documented. | Color, finish system and project environment are confirmed before production. |
| Trolley function | The documented trolley provides lock and unlock functions for repositioning the bag. | Trolley selection, locking arrangement, suspension and filled bag data are confirmed per project. |
| Route planning | Modular track and multiple support directions are documented. | Straight sections, turns, end points and parking path are approved for the room plan. |
| Bag stations | Working positions can be planned along the route. | Station count, spacing, hanging height and clearances are project inputs—not universal published values. |
| Site structure | Ceiling, suspended, floor-supported and wall-mounted directions can be reviewed. | A qualified local party must verify the receiving structure, anchors and site conditions. |
| Supply and installation | Modular and flat-packed supply is documented. | Packing, installation scope, local work and responsibilities are stated in the written quotation. |
Project Drawings Before Production
EVB uses its DrawHub workflow to turn the buyer’s available venue information into a reviewable configuration direction. Drawing content and turnaround are confirmed with the project scope rather than promised as a universal deadline.
1. Send the available plan
2. Review the route
3. Approve the project basis
Built for Brands, Distributors and Equipment Suppliers
EVB manufactures and configures the rail equipment scope so brands, distributors and equipment suppliers can deliver their own downstream gym projects. Final private-label details, finish, documentation, packaging and supply boundaries are defined in the written quotation.
Private-label requirements
Finish and color
Project documentation
Direct Answers for Project Planning
Какая конструкция необходима для подвесной системы крепления боксерских мешков?
Универсального ответа нет. Необходимо определить и проверить состояние несущего бетона, конструкционной стали, балок перекрытия или других опорных элементов на предполагаемом маршруте прокладки. Если верхняя опора непригодна, можно рассмотреть вариант прокладки по полу. Ответственность за проверку конструкции здания и анкерных креплений несет квалифицированная местная организация.
Какую нагрузку может выдержать каждая рельсовая тележка?
Компания EVB не публикует единые номинальные нагрузки для всех проектов. Тип тележки, система подвески, вес заполненного мешка, динамические нагрузки, расстояние между опорами и принимающая конструкция должны быть согласованы в утвержденном проектном чертеже и письменном коммерческом предложении.
Может ли трасса повторять повороты или форму помещения, выполненную по индивидуальному проекту?
Маршрут планируется на основе фактического чертежа помещения, а не выбирается из одного универсального шаблона. Повороты, конечные точки, места опоры и траектория парковки утверждаются только после проверки геометрии и конструкции.
Как мешки удерживаются на месте во время тренировки?
В технической документации EVB описана тележка с функциями блокировки и разблокировки. Перед началом производства для данного проекта подтверждаются выбранная модель тележки, схема блокировки, рабочие положения и детали подвески.
Предоставляет ли EVB услуги по планированию планировки с учетом специфики конкретного проекта?
EVB can review project-specific layout information through its DrawHub workflow. The exact drawing package, required inputs and turnaround are stated in the written quotation.
How is the system prepared for export shipping?
EVB technical material documents modular, flat-packed supply. Section lengths, crates or cartons, component marking, loading plan and installation documents are confirmed according to the approved configuration and shipment requirements.
Request a Project-Specific Rail Quote
Send the project details you have on hand—any open items can be reviewed and confirmed during quotation:
- Company or brand name and destination market
- Dimensioned room plan and available supporting information
- Ceiling, beam, wall or floor-support information
- Bag models, quantities, filled weights and hanging height
- Preferred working positions and parking area
- Finish, documentation requirements and target timeline
ДОКУМЕНТАЦИЯ И СТАНДАРТЫ БЕЗОПАСНОСТИ
Материалы промышленного качества, проверенные в ходе реализации проектов по всему миру
Ceiling Track Punching Bag Rail System
Links multiple bags on a sliding track so operators can deploy or park stations and convert the room for team classes.
Engineering & Technical Specifications
| Материал каркаса | Heavy-gauge Q235B structural carbon steel (seamless welding) |
|---|---|
| Steel Tubing Thickness | 3.5 mm – 4.0 mm industrial structural wall thickness |
| Отделка поверхности | Electrostatic double-stage powder coating (anti-corrosion, anti-scratch) |
| Load / Impact Capacity | Tested to withstand dynamic impact exceeding 8,000 N / 500 kg static load |
| Safety & Compliance | CE Certified, complies with EN ISO 20957 commercial fitness standards |
| Customization (OEM/ODM) | 0 MOQ custom dimensions, RAL powder colors, UV laser printed branding |
| Packaging Standard | Reinforced export-grade plywood crates with custom internal foam cradles |