On the wall-mounted unit shown in this demonstration, the operator uses a pull strap to lock and release the trolley. Locking the trolley holds its position along the rail while the suspended bag can still swing.
Video walkthrough and key timestamps
- 0:07–0:18 — Locking & releasing: Pull the strap to disengage the trolley lock, then release/set it to hold the trolley at its station along the rail.
- 0:24–0:31 — Moving the bag: With the lock released, slide the bag smoothly along the track to its next training or parking position, then re-engage the lock before training.
Note: The trolley lock holds the carrier at its training station; the end stop at the end of the rail prevents the trolley from rolling off the track.
If the trolley does not slide smoothly
- Confirm the lock is fully released using the pull strap.
- Visually inspect the inside of the rail channel for dust, tape, or debris.
- Check for fastener or joint interference—if the trolley catches at a splice or mounting bracket, stop sliding it. Do not grind, drill, or modify supplied fasteners or trolley parts.
- Take a clear photo of the interference point, note the part number on your packing slip, and send both to EVB support.
Request a Rail Layout and Quote A dimensioned sketch is enough to start.
